Amazing Machines

07/25/2017 - Amazing Machines Intros AM107
Voltage Controlled AHDSR for Reaktor Blocks

A 5 Stage Envelope Generator with Selectable Rate that goes up to a 100 seconds per Stage. Sporting Analog and Digital Triggering Modes, Cycle Mode, Continuously Variable Envelope Curves and much more, AM107 makes the creation of sophisticated Envelope Curves a breeze.

09/30/2016 - Amazing Machines Intros AM106
Ring Modulator for Reaktor Blocks

An advanced Ring Modulator, with features such as Dry / Wet Mix Control, Polarity Flip Switches and Continuously Variable X Axis Curves, AM106 takes Audio and CV Mangling to a whole new level.

08/22/2016 - Amazing Machines Intros AM105
Quad VCA for Reaktor Blocks

A highly flexible Quad VCA. Sporting Continuously Variable VCA Curves that range from Exponential to Logarithmic and anything in between, AM105 can Link VCA 1 to VCA 2 and VCA 3 to VCA 4, allowing for complex Amplitude Modulation Paths such as Tremolo Effects, Overall Volume Control and Effect Sends.

04/05/2016 - Amazing Machines Intros AM104
CV Mixer for Reaktor Blocks

An 8 Channel CV Mixer, optimized for use in conjunction with a DC Coupled Audio Interface to convert Reaktor Blocks Signals into Analog Control Voltages, allowing the interaction of Reaktor Blocks Modules with Hardware Synths and Modular Systems.

10/29/2015 - Amazing Machines Intros AM103 Quad Attenuverter & Offset Generator for Reaktor Blocks

Built to function as an Expander Module for other Amazing Machines' modules, AM103 can also be used as a Command Center for all Modulations within a Patch, taking care of Modulation Levels and Offsets, as well as individually Muting Modulation Sources.

10/25/2015 - Amazing Machines Intros AM102 Programmable Wavetable Oscillator for Reaktor Blocks

A Programmable Wavetable Oscillator, featuring a 16 Stages Wavetable with 3 selectable Playback Modes and 3 types of Output Curves, AM102 is a Shape Shifter yet to be rivalled.

10/03/2015 - Amazing Machines Intros AM101 Colorful Noise for Reaktor Blocks

A Noise Generator like no other, AM101 can do much more than a standard Noise Generator. Earth Shaking Noise Sweeps, Modulated Noise, Tuned Noise, Chiptune Style Noise and Random LFO Speed Noise are so easy to achieve with AM101 that you won’t believe your ears. AM101 also comes with a Builtin Output VCA, making the setup of complex patches fast and easy.

08/13/2015 - Amazing Machines Releases
WRECKER - Wave Folder for Reaktor

A Multi-function Effects Processor Ensemble for use with Native Instruments’ Reaktor. With focus on Wave Folding Effects, WRECKER also includes a Pulse Modulator, a State Variable Filter, a Pan Modulator and an Oscilloscope.

03/07/2015 - Volcano Kit Compatibility Announcement

We are proud to announce that our Volcano Kit is fully compatible with the KORG Volca Sample.

The MIDI Output Port on the Volca Sample transmits the following messages:

- Start / Stop Commands

- MIDI Clock

- Trigger Output from Part 1 to 10 (MIDI Channels 1 to 10)

Note: The current Volca Sample Firmware, version 1.3, doesn't allow the Volca Sample to transmit MIDI Continuous Controller Data from it's Knobs, this functionality may be added in a further Update.

11/15/2014 - Amazing Machines Releases Amazing PEQ-1 FREE - Parametric EQ and Preset Warmer

A straightforward Overall Tone Shaping tool, capable of drastically change an audio source with its 1 Band Mid-Range Equalizer and its Preset Warmer.

The Amazing PEQ-1 FREE is Free for anyone to download!

11/07/2014 - Amazing Machines Intros BRUTE VRS - Virtual Recall Sheet for the MINIBRUTE

A Virtual Recall Sheet for the Arturia MINIBRUTE, which allows users to digitally store patches made on the Hardware Synth.

Although the BRUTE VRS does not generate any sound on it’s own, special attention to detail has been taken to achieve visual feedback that is as close as possible to the hardware instrument, including the LEDs for Octave Selection, Envelopes, LFO and Arpeggiator Tempo.

The Pitch and Mod Wheels respond to incoming MIDI Data from the MINIBRUTE, while the Envelopes’ LEDs blink, in a similar fashion to the hardware, when notes are played and depending on how the Envelopes are set. The Arpeggiator Tempo can be Synced to a DAW’s Tempo using the Clock Source Switch. This level of detail may sound trivial at first, for a simple Virtual Recall Sheet, but it’s essential to allow the end user to store and load patches fast and easy.

05/22/2014 - Amazing Machines Releases the Amazing Scope Suite for Reaktor

A bundle of 3 unique Reaktor Ensembles that will change the way you see Waveforms in your DAW. With unparalleled features such as Freezed Waveform Navigation, Tempo Synced Triggering and MIDI Triggering, the Amazing Scope Suite brings the Oscilloscope to your DAW, an Essential Tool that has been available in Professional Studios for more than 40 years.

03/08/2014 - Amazing Machines Releases Volcano - MIDI Output Interface for the KORG Volca Series

Features:

- Custom-built Spacer for the MIDI Output Connector
- Factory Pre-assembled
- Turns any KORG Volca into a neat MIDI Sequencer and Controller
- Enables recording of Parameter Automation and MIDI Note Data directly from any KORG Volca to an External Sequencer or DAW for later playback

Compatibility:

Compatible with the KORG Volca Bass, Volca Beats and Volca Keys.

Installation Requirements:

Basic soldering skills are required for installation, as simple as soldering 3 wires to the main PCB of your KORG Volca, as shown in the picture.

04/05/2013 - MIDITRIBE & THE MONOTRIBE OS 2.1

Any MIDITRIBE Revision will work 100% with the MONOTRIBE OS 2.1 update. The update brings us a new feature:

- Muting a step in the internal sequencer now mutes the same step when a sequence is sent to the MIDI Output Port

MIDI has priority over CV, when a MIDI Note On message is received any incoming CV signal will be ignored.

05/12/2012 - Amazing Machines Releases NastyMono - Feedback Controller and I/O Adapter for the KORG Mono Series

Features:

- Stereo 3.5mm I/O cables
- Mono 1/4" Auxiliary Input
- Mono 1/4" Audio Output
- Feedback Attenuator for Optimal Control over the Feedback Path
- Fixed Passive Low Pass Filter to clean up the Feedback Path
- Passive Device, no batteries or PSU needed

The NastyMono was designed for the KORG Mono Series and will work properly with any of the following devices:

Monotribe
Original Monotron
Monotron Duo
Monotron Delay

You still can use the NastyMono with any other Analog Synth that features a VCF Input and Multiple Audio Outputs or a Separate Headphones Output. However due to the nature of the KORG Mono Series the 1/4” Auxiliary Input and the 1/4” Audio Output Signals on the NastyMono rely on the RING contacts found on the 3.5mm I/O cables, there for the 1/4” Auxiliary Input won’t work if your Synth features a Mono VCF Input, the same goes for the 1/4” Audio Output, if the NastyMono is being feed by a Mono Signal the 1/4” Audio Output won’t work. Despite the fact that the 1/4” connectors won’t work depending on your specific Analog Synth, the Feedback Knob will still work, giving you the desired Distortion Effect, a good example is the Moog Minitaur which will access all the NastyMono’s functionality except for the 1/4” Auxiliary Input.

04/12/2012 - Fabrizio Poce Releases MTribe - Editor and Control Surface for the Korg Monotribe

Netherlands-based developer Fabrizio Poce releases MTribe, an editor and control surface for the Korg Monotribe. Our MIDITRIBE I/O Interface was used by Fabrizio during the development, so the MTribe editor is 100% optimized for the MIDITRIBE I/O.

MTribe is available as standalone app for Mac and Windows as well as an Ableton Live / Max for Live device.

For more information please visit http://fabriziopoce.com/MTribe.html

03/16/2012 - NastyMono gets a guest appearance on the Moog Minitaur Video Review by Nick Batt at Sonic State

Our upcoming product the NastyMono has featured a guest appearance on the lastest Moog Minitaur Video Review by Nick Batt at Sonic State. The NastyMono is a Hybrid Feedback Controller and I/O Adapter for both the KORG MONOTRIBE and MONOTRON Series, also as shown at 6:00, it can be used with any Analog Synth that features an Audio Input and a Headphones Output for adding punch, gritty or extreme distortion to the Signal Path. It features a fixed passive LPF to clean up the Feedback Path, a 1/4" Aux Input and an Extra 1/4" Audio Output. Selling price will be $59.00 USD, it is expected to be available by April 2012.

02/21/2012 - Nick Batt at Sonic State Reviews the MIDITRIBE I/O

Our friends at Sonic State did a very nice Video Review of the new MIDITRIBE I/O, our Pre-assembled MIDI IN and OUT Mod Kit for the KORG MONOTRIBE.

02/18/2012 - Amazing Machines Intros MIDITRIBE I/O - MIDI IN and OUT Interface for the KORG MONOTRIBE

Pre-assembled, no soldering, just plug and play!

What's new in the MIDITRIBE I/O:

- Added MIDI OUT functionality (Outputs MIDI Clock / The Synth Part

works as an arpeggiator running at 1/16, which responds to pitch

information recorded in each of the internal sequencer's 16 steps for

controlling external synths on MIDI Channel 1 / The Rhythm Part sends

trigger information to MIDI Channel 10)

- Control external synths using the Ribbon Controller for Note ON / OFF,

Expression Controller (CC 11) and Gate Time

- Send Continuous Controllers 1, 16, 80, 81, 82 and 83 to MIDI OUT

Channel 1

- Couples as a MIDI Clock to Sync Pulse or Sync Pulse to MIDI Clock

converter using the MONOTRIBE's built-in Sync I/O

- Added the best MIDI (Female DIN5) connectors available on the

market

- Added a Manufactured PCB

- New List Price of $64.00 USD

- $10.00 USD Upgrade Rebate for Previous Owners (Previous Owners

please contact us before placing orders)

We will start shipping by Thu, Feb 23 due to the Brazilian Carnival

Holidays.

MIDITRIBE I/O Pre-Order starts Sat, Feb 18.

12/06/2011 - MIDITRIBE & THE MONOTRIBE OS 2.0

Once the MONOTRIBE OS 2.0 was released, many customers came to

us asking if their MIDITRIBE would still work after the update, the answer

is yes, any MIDITRIBE Revision will work 100% with the MONOTRIBE

OS 2.0 update and there is more, the MONOTRIBE OS 2.0 brings us

two incredible new MIDI features:

1 - Velocity Sensitivity for the "Synth Part" (VCA Level)

2 - Control of the "VCA Level" using CC 7 (Vol) or CC 11 (Expression)

All media, registered trademarks and logos are property of their respective owners